Right Weigh’s [201-EBT-01RK] Bluetooth Exterior Digital load scale kit

Looking to ensure your cargo stays within safe and legal weight limits? Look no further than Right Weigh's 201-EBT-01RK Bluetooth Exterior Digital Load Scale Kit, now available at Northgate Cargo Control.

Engineered for air suspension axle groups with one height control valve, this kit provides accurate, real-time weight readings for your load. Whether in pounds or kilograms, you can trust the reliability of the gauge after performing both empty and loaded calibrations at a certified ground scale.

With the 201-EBT-01RK, you gain the most valuable tool for maintaining safe and legal axle weights. Keep your operations compliant and your cargo secure with Right Weigh's cutting-edge load scale technology.

Please note: This kit is specifically designed for axle groups with one height control valve. For axle groups with two HCVs, consider our 201-EBT-02 model for effective monitoring.

201-EBT-01RK Specs:

Includes (1) 201-SK Installation Kit

Contains all parts that should be needed to monitor weight, depending upon height control valve configuration.

Max Height Control Valves: 1

Max Axle Groups Monitored: 1

Max Axles per Axle Group: 3

Color: Black

Mounting: Exterior

Enclosure Included: Yes

Mounting Type: Bolt-On

Bluetooth: Yes

MFG Warranty: 3 Years

Installation-Operation-Calibration Manual: (Available Here)

Firmware Versions 31.001, 31.002, 31.003, 31.004, 31.005, 31.006, 31.007, 32.001, 32.002, 32.003, 34.001, 34.002, 34.003, 34.004, 34.005, 35.001, 40.001, 40.002, 40.003, 42.001, 42.002, 42.003, 42.004, 42.005, 42.006, 42.007, 42.008, 42.009

Technical Specifications:

Operating Temperature: -22° F to +185° F (-30° C to +85° C)

Storage Temperature: -40° F to +185° F (-40° C to +85° C)

Power Requirement: 9 VDC to 32 VDC (Switched)

Units: Pounds (LBS) or Kilograms (KG)

Housing: High impact polycarbonate blend

Display: 0.8” LCD sunlight readable

General Information about Right Weigh Interior Digital Load Scales

The 201-EBT-01RK scale is designed to be mounted on the outside of a truck or trailer and mounted the included protective enclosure. The 201-EBT-01 load scale must be calibrated both empty and loaded to work properly. The scale associates the air pressure in the suspension system to the weight you enter at the time of calibration. You will need to calibrate once while the vehicle is empty, and again while the vehicle is loaded for each axle group being monitored.